Write About Everything

Locked Keys in Car? Here’s How to Open Your Car Without Damage

If you’ve locked your keys in your car, don’t panic. There are a variety of tricks you can try before calling a locksmith, or a roadside assistance service.

For instance, you can make use of a shoelace that has a slip knot to tie up a post lock or a wire coat hanger that you untwist and mold into hook. You can also make use of an inflatable wedge or a door wedge.

Pump Wedge

If you’ve found yourself in a locked car and none of the DIY options like shoestrings, wire hangers or wedges work for you, it’s time to call a professional. A locksmith or repo service provider might have special lockout equipment that will allow you to unlock your car without damaging it.

Make sure you use them correctly if they are available. Be aware of where to place the wedge tool. Many people mistakenly put the wedge in the upper corner of the door, which is where it is most prone to being damaged. This is not a good idea as you’re more likely to damage the weather stripping or wires within the door. Instead, place the wedge in the largest portion of the gap that is visible and where it has the most leverage.

The Pump Wedge is an inflatable wedge made of high-quality vinyl that doesn’t scratch the surface. It slides between the vehicle door and the door frame. It is pumped up to create a separation that will allow you to slide in other tools like a long-reach car opening tool rod. It also has a hook at one end, which you can shape to hold the latch inside the door handle.

This can be done with a pair wooden door stops. You can place them on the back of the car door to pry the space wide enough to accommodate rods. You could also try using the slim jim, which is thin metal strip that can be bent into a hook, which can then be snared to the lock and then pull it up. This method isn’t without practice, however, since you should be cautious not to damage the weather stripping on the door.

A shoelace is another good alternative, but it’s only with older cars that don’t have a push button for unlocking. You can tie a knot in the middle and move the lace up and down the door seam until you spot the latch. Then move the lace up and down until it is able to catch on the lock. Secure the slip knot and then pull it upwards. This method is more difficult than the other, and it may scratch the paint or dinge the door trim if not careful.

Inflatable Wedge

You can easily unlock your car using a wedge-shaped inflatable door opener. This will spare you from having to use prying tools or slim jims. These wedges for car doors can be placed between the window and the frame of the vehicle, and when inflated they create a space enough to fit an extended-reach tool like an a-slim jim or button grabber. This method is less risky than using tools to pry and can be used when you do not have an screwdriver.

Another option to unlock a car without damaging its exterior or interior is to make use of a coat hanger made of wire that has been shaped into a hook. This can be used to secure the lock and might work better than the flat screwdriver because it is less likely cause damage to the paint on the car. However, you should still examine all doors to ensure there isn’t another way to gain access.

You can also make use of a plastic bag that has been twisted into a noose or V-shaped shape. Be careful not to tear the bag, since it can make the situation worse. This trick is especially useful if you can’t find the lock button. It might not be as reliable as using a wedge or a metal coat hanger however, it can be useful when you’re in a tight spot.

The best tip we can give you on getting locked out of your vehicle is to be at peace and focus on safety. There are many solutions to this kind of problem, and if you read this article, you can be prepared for any situation that may come your way. If you follow the steps we’ve given you will be capable of unlocking your car and go on with your day without causing any damage or stress. If you are able, bring your keys when you leave your car door open.

Shoelace

Locked out of your vehicle is one of those “oh crap” moments that can cause you to lose your day. It’s a good idea to have a few things that you can use to unlock your car without breaking any windows. Certain of these items are simple to locate and can help you avoid the expense of hiring a locksmith or having to wait for roadside assistance to arrive.

A shoelace or twine can be used to unlock a vehicle. It’s simple to use and can be used on a wide range of vehicles. The most important thing to consider is a car equipped with post locks. They are stacked vertically on the window sill and are easily accessible from the outside of the vehicle. Make use of a shoelace and an elongated slip knot to get the job done. Then, wiggle the shoelace through the crack between the door and window frame. Once the slip knot has been set in the right place, pull both ends of the string upwards to loosen the lock.

This method is more effective for older vehicles. It may not work on modern models that have a hook inside lock. If you have a screwdriver handy you can use it to unlock the door more forcefully. You can also use a pole that you can take from a nearby object like an old doorframe, or even an object of wood to attach to the window frame. This will create space for a rod to push the interior locking button.

Although the above methods may be safe for a lot of drivers, it is best to call for assistance if you can. This will help prevent further damage to the vehicle and reduce the chance of an accident due to stress. If you don’t have a cell phone or are unable to call for help It is important to let trusted friends and family members know where your car is at all times. Also having a spare set of keys could be kept in an easily accessible location on the vehicle so you can access them when required.

Wire Hanger

There is no doubt that locking your keys in your car could be a stressful situation. It is important to remain at peace and think through your options carefully. You can avoid making the situation worse if don’t get caught up in panic.

One of the most effective things you can do is make use of a modified wire coat hanger to get back in your vehicle. You will need uncoil the coat hanger wire to make a straight end with a hook that you can use to manipulate the lock rod. Once you reach the lock rod, you should be able to pull it up to open the door.

Another option you could try is to use a rod or even the metal of the body of your car. It is important to ensure that you don’t damage the vehicle in this process. It is best to avoid having to take apart the vehicle. It is also important to be as patient as you can as this method is likely to be more effective for older cars than on modern ones, however it is still a viable option if you have a model with a unique outer door handle style.

You can accomplish the same thing with a shoestring tied in the slip knot. It can also be used on a post lock, but it will be somewhat more difficult to use because you’ll depend on the tension from the string to grab the lock. It is possible to do this by threading a shoestring into the tiny hole in the weatherstripping that is on the doors of your vehicle. After the shoestring has passed through the weatherstripping, you are able to pull it tight to form an elongated loop that will snap around the lock. This method is extremely effective if you are lucky enough to find the lock in the correct place.