Write About Everything

Ghost Immobiliser Installation

Install a ghost immobiliser on your vehicle to protect it from thieves. Our TASSA-certified system guards against hacking, key cloning, and vehicle immobiliser bypass.

The system is hidden inside the wiring loom of your vehicle so it’s completely invisible to anyone who is looking. It works by creating a pin code push sequence that is pushed through buttons already present on the steering wheel doors, door cards, and the central console.

No circuit cuts

A car is a valuable possession that you spend many years of effort to acquire, so it’s understandable why car owners would want to secure their vehicle against theft. Traditional security systems, such as alarms or wheel locks, can be easily bypassed by thieves. Ghost immobilisers however is a very effective solution that is silent and isn’t easily recognized by modern day thieves.

Ghost immobilisers are hidden device that connects to the CAN data network in your vehicle to disable the engine without the use of radio frequencies or key fobs. It communicates with the vehicle’s ECU via buttons already on the steering wheel, dash and door panels to generate a unique pin code that you only can access. The code can be changed at any point and can be as long as 20 digits long depending on what you prefer. It also includes a secure emergency code that you can use should you forget your PIN.

The ghost immobiliser can be used to prevent a relay box from transferring the signal of your car’s key from within your home, which could unlock the doors and start the vehicle. It can also block high-tech methods to steal your vehicle, such as OBD port hacking. The device is small and weatherproof, so it’s difficult to detect and is also difficult to alter with.

Another benefit of the ghost immobiliser is that it can be installed in your car without any permanent marks. It is ideal for people who plan to sell their vehicle in the near future. It’s also faster and simpler to install as when compared to a factory-fitted model.

The Autowatch Ghost is a groundbreaking next-generation device that can stop theft of cars using contactless technology by connecting to the vehicle’s CAN data network and using existing buttons to generate a unique PIN. This is a hidden device that can be set up without severing any wires and does not require any additional key fobs. It can also be connected to the vehicle’s original ECU to prevent thieves from gaining access by using a new key or replacing the ECU with a “relay”. This system has been verified by TASSA and can be linked with an International Security Register. Owners will have peace of mind knowing that their vehicle is secured from theft.

No scanning with RF

You’ll want to secure your vehicle from theft when you have spent lots of money and effort to customize it. One of the best ways to accomplish this is to install an immobiliser. It will stop your engine from starting unless you enter a unique PIN. You can create a 20-digit PIN using the buttons on your dashboard or the steering wheel. This will ensure that only you have the right to drive your vehicle. It is also possible to set up a service and valet mode, which will allow you to start your car temporarily without entering the PIN. This allows your technician to work on your vehicle without you being present. This is a great option for people who want to save time and simplify their lives.

Ghost immobilisers are next-generation device that connects to your vehicles CAN data network and uses the buttons on the dashboard and steering wheel to program a unique PIN code. It is designed to be stealthy, with no indicators or sounds to signal it and can be installed anywhere on the vehicle, without impacting the look of your pride and joy.

This stealthy device has been approved by TASSA and can lower the cost of insurance. It has a tracking function that can locate your vehicle even if it’s stolen. This is particularly useful if have a costly or rare vehicle that you have invested lots of time customizing.

The Autowatch Ghost can be used in conjunction with an iPhone application to allow you to start your vehicle remotely in the event that you have forgotten your PIN or are unable to get into the vehicle for some reason. This feature is perfect for ghost immobiliser Installation when you have to take your kids to school or go on errands, but don’t want to risk having someone else drive your vehicle. This feature is useful if you have to take your car in for service or repair.

The Ghost has the advantage that it doesn’t transmit or detect radio frequency which means it’s not detected by thieves who employ RF scanning and code grabbing technologies. It also has the ability to protect your car against key cloning and ECU swapping as well as other the most common methods used to steal cars.

No key to cloning

Ghost immobilisers are an excellent method to protect expensive cars and stop key cloning. They work by preventing your car from starting unless an additional PIN code is entered alongside the regular key fob. This makes it very difficult for thieves to steal the vehicle, and can deter them from attempting. This is a good idea if your vehicle has been heavily customized or if it is a rare model.

The immobilisers are connected to the vehicle’s onboard CAN network and are completely hidden, which means there is no visible indication of its presence within the vehicle. It is also impossible for thieves to identify the device using radio frequency scanning or code technology for grabbing. This means that a criminal will have to spend a lot more time to steal your car.

A criminal will need to be aware of the pin code and the exact location of the ghost 2 immobiliser fitting near me in order to get around it. The pin code is unique to you and you can alter it as many times as needed. The pin code is simple for you to remember but mathematically impossible for anyone else to figure out. Additionally the engineer will have provided you with an emergency PIN code that can be used to bypass the pin in case you forget the pin.

The Ghost CAN Bus immobiliser could be installed in a matter of minutes on your vehicle. It is compatible with all vehicles and completely customizable to match the style of your vehicle. It is also very affordable and simple to use. You can even transfer the device to a different vehicle if you decide to change vehicles during the course of ownership, as long as the new vehicle is compatible with it.

The CAN bus immobiliser is also compatible with a variety of other security features. It could, for instance detect damage to the vehicle and notify the owner. It could also stop the engine in the event that the vehicle is damaged. The system also protects your vehicle from key cloning and hacking. It can also detect any vibrations or contact with the vehicle. It will also notify the owner when the vehicle is moving.

No OBD port hacking

Ghost is a hidden device that is connected to the CAN data network of your vehicle. This prevents a thief getting into your vehicle to disable the alarm, deactivate your key fob, and code new keys. This technology is a step up over the methods that were used by thieves to steal vehicles in the past. The CAN data networks means that your system will not be affected when you disconnect or change your battery.

The Autowatch ghost 2 immobiliser fitting near me, the first non-detectable CAN bus immobiliser aftermarket in the world, guards against key-cloning, hacking and replica car theft. It does not utilize LED indicators or key-fobs. Instead, it uses the buttons on your steering wheel, console and door panels.

Modern thieves use diagnostics to detect circuit cuts on your vehicle. They can bypass immobilisers that require a lot of wiring or are integrated into the wiring. The Ghost is weatherproof and does not require any additional wiring. It is not able to be identified by diagnostic tools that are professional. It can be put in on vehicles with anti-theft devices.

Another major benefit of the Ghost immobiliser is that your vehicle can only be started by a person who knows the PIN code and has physical access to your car. This is a significant advantage over security systems that are able to be bypassed using cable alteration, a screwdriver or the use of an universal remote controller.

You can easily reset your PIN if forget it using the emergency PIN override feature on your mobile or computer. This is a great option if you need to start your car when it’s been left in a garage or at a valet parking service.

The Autowatch Ghost 2 has been approved for insurance by TASSA and can be installed by our authorised installers. It features a QR fingerprint system to identify parts that are not in use that allow for the return of stolen items if they are found. It can also be turned into a service mode’, which allows the engine to start when your vehicle is parked in a garage or with valet parking, however, you must enter your PIN code again to exit the vehicle.