Write About Everything

The function of the lining of the conoid crusher is to shield the cyndrical tube body, in order that the cyndrical tube body is not directly impacted and also used by the grinding body system as well as the material. It can likewise use its own different functioning areas to adjust the functioning condition of the grinding body system to enhance the grinding day. The crushing impact of the material strengthens the grinding efficiency, enhances the result, and also lessens the reduction of the lining as well as the channel.

Conoid crusher liner substitution

When the liner of the cone crusher is actually certainly not put on to the magnitude that it needs to be switched out, the pearly white plate may be turned around, or even the upper as well as reduced components could be reversed. When the thickness of the liner of the conoid crusher arrives at 65% to 80%, or even the partial wear is actually warped and also broken, it ought to be switched out. After setting up the liners, inspect whether their facilities are appropriate. If the center is actually not right, crashes will definitely happen during turning, and also the fragment size of the product will be actually irregular, which are Going Here to induce breakdowns including heating of the friction parts in the equipment.

The liner of the cone crusher used to make use of higher manganese steel as well as tweaked higher manganese steel, carbon blend steel and also chromium cast iron. Currently to improve the service life of the liner, Hysan normally uses manganese steel with a manganese material of much more than 13%. Under a sturdy effect lots, it creates solidifying as well as wear-resistant sturdiness on its own surface area.

Conoid crusher liner-installation technique

( 1) Place dry ice into the interior gap of the bushing to become set up to lower the cool dimension of the bushing. A small amount of filler can be added to the bushing to produce the solidified carbon dioxide fully talk to the bushing.

( 2) After filling up the solidified carbon dioxide, cover the bushing and the dry ice inside with canvass to stop icing on the external surface of the bushing.

( 3) The cooling time is pair of hours. The approach of determining the dimension of the bushing could be made use of to identify whether it has actually been actually adequately cooled down.

( 4) If it is actually found out that the bushing is actually sufficiently cooled, it should be quickly set up into the internal hole of the structure. After being actually put up in place, the upper surface area of the framework bushing need to be actually flush with the higher area of the interior hole of the framework. If there are difficulties in the installation procedure, a timber hammer can be made use of to hammer the higher surface area of the bushing gradually and also evenly until the whole bushing is in spot.

( 5) After the liner is in area, molten zinc alloy filler is actually generally used to deal with the liner.