Write About Everything

Window Repairs

Window repairs can help homeowners save money and keep their homes warm. In the event of severe damage, such as broken glass or a cracked frame, a window replacement could be required.

Other issues can be fixed to extend the lifespan of windows. The most frequent issues are:

Cracked or Broken Panes

If it’s an unintentional rock thrown by your lawnmower or a tree branch blown by strong winds, cracked window glass isn’t just unattractive but can lead to higher electricity bills as the broken pieces allow cold air into your home. It’s fairly easy to fix windows with damaged panes.

Start by carefully removing the glass using gloves and glasses. You may need to employ a utility knife to remove any remaining putty or glazing compound around the edges of the frame. Next, wipe down the glass’s surface and the wood of the frame with a soft cloth or paper towel.

After the area is cleaned then apply a waterproof silicone caulking on the perimeter of the frame. This will prevent water from getting into the frame through the crack and causing further damage.

If you have double glazed window repairs near me-pane glass, a bad crack could compromise the gas layer that lies between the panes and make your windows less insulative. If the crack is serious enough to threaten the integrity of the glass or the glass has an inner pane that’s completely missing, it might be the time to call a professional.

Thermal stress cracks can also occur when there’s a significant difference in temperature between the outside and inside of your home, which causes the glass to expand or contract. If this happens across two parts of a window, it’s probably best to simply replace the pane rather than trying to repair it.

For windows that have cracked but aren’t yet ready to be replaced, clear tape can do a great job of securing the crack and keeping out bugs and cold air. You can cut a piece of nylon stocking or tarp that’s sufficient to cover the crack, and fix it with duct tape. This isn’t a permanent solution however it can be useful in a pinch and it keeps insects and cold air away from your home. If your windows are old and you’re beginning to see cracks in the glass It’s a good idea to check with your local window Repair company to determine if replacing the entire window could be the best solution for you.

Rotten Wood

Wood rot is one of the most frequent problems that plague windows. It can damage a home’s appearance and pose a safety danger. It is possible to repair the wood that has rotted. The first step is to ensure that the source of the rot has been taken care of. This can be done by examining for leaks in the roof and gutters that aren’t functioning or cracked caulking, as well as other areas that allow water to get into the wood.

Next, you will need to remove any rotten areas of the window frame. This can be done using the use of a chisel, rasp or claw hammer. After the areas that are rotten have been cleared, you will need to replace them with new wood. It is recommended that you choose treated wood for this project as it will be resistant to decay. If you are not able to replace the damaged timber, you can use filler and wood hardener to repair the damaged area. This kind of product will be found in a lot of hardware stores. To get the best results, make sure you follow the directions on the label.

After you have repaired the damaged areas of the window sill, it’s crucial to protect the area. Apply a water-resistant sealant on the wood. A product like Sikkens is an excellent option for this job.

You can also use an epoxy filler that is two-part to protect the wood from further damage. This product is easy-to-apply and leaves a nice finish. However, it is important to follow the application instructions on the label. Once the epoxy filler has dried, you can sand down the wood’s surface. It is best to start with a rough grade of sandpaper, and then progress to a smoother grade.

The last thing you want to do is make the rotted area even worse by exposed to more water. So, it’s a good idea to cover the area that has been repaired with an oil-based primer which will protect it from moisture. After that, you can reapply the wood sealant that is waterproof.

Won’t Open

There are a variety of reasons a window won’t open. Wood frames can warp during humid weather, the house could have settled or someone may have closed it for security reasons. With a bit of patience and the right tools, you can unlock most stuck windows.

Accumulated debris or gunk can be a major cause of the window not opening. Grime and dirt build up on the sliding tracks, hinges, and locks over time, notes Acme Glass. Metal hardware can also rust if it comes into contact with humidity and direct sunlight. Spray grease on these areas will help prevent oxidation, and keep your windows functioning well.

The pulleys used to raise or lower the window repair can become loose, or even break. These components may lose tension and become obstructed, especially when the upvc window repairs near me is two or more stories above the ground.

If you have trouble opening a door, use a pry-bar to gently open the door. Place a block on the frame of the window to give the pry bar more leverage. Be careful not to scratch the wood or the window. Try using a hairdryer to dry the frame’s edges for several minutes. This will warm the wood, making it easier to move.

A broken spring could be the cause of windows that aren’t able to raise or lower. Depending on the manufacturer of the windows, you’ll be required to refer to the manual of your owner for additional instructions.

If you’ve tried cleaning and lubricating the moving parts on your windows, but they still aren’t opening, it may be time to replace them. Homespire Windows & Doors provides energy-efficient replacement windows. Don’t let your windows go from functional to unusable because a upvc window repair that isn’t properly shut could make your home vulnerable to water damage and burglary. Contact us to learn more about our replacement windows and services today!