Write About Everything

Replacement Upvc Window Handles

Most replacement windows handles made of upvc come with everything you require. However the handle you had previously was secured by screws or pins, they will need to removed. Then, remove the’snap-in’ cover that is on the base of the handle.

You will then need to identify what type of window lock and handle you want to replace. This is vital!

Espag

Espag handles are a multipoint lock that is installed on casement windows, such as uPVC and double glazing made of wood. They come with seven millimetre square spindles that can be fitted into the gearbox on a uPVC window and when the handle is turned, it triggers an array of locks around the perimeter of the window. Espag handles are also referred to as shootbolt handles and offer more security than the standard single point lock found on older window frames.

They are available in a number of different options such as inline and cranked designs that can be used in left or right hand operation. There are also ergonomic handles that enhance the look and feel of your window, as well as the handle.

You will need to measure the size of the spindle from base of your uPVC handle if you want to purchase the right replacement. This measurement is referred to as step height. It will aid you in finding the perfect uPVC handle for your home.

You may have to remove any screw covers that protect the screws that hold the handle in place, and if this is the case, you can use a screwdriver to remove these or pliers to break the pins holding the handle. After removing the pins or screws that hold the spindle together you can take it apart to disassemble the handle.

After removing the handle you will be able to access the locking mechanism in the frame of the windows. You can then remove the cockspur block attached adjacent to the handle. This will allow the window to be opened. The new uPVC handles you purchased should be able to slide onto the cockspur block before sliding into handle spindle to allow the window to open again. The ideal solution is to replace the cockspur wedge block with an entirely new one when you change your uPVC handle to ensure that it is properly secured.

Cockspur

Cockspur handles are commonly found on older uPVC or aluminium windows. The handle is closed and then turns onto a wedge-shaped plastic receiver catch. (Not to be confused with timber latches which are also covered in this section.) The handles are available in lockable and nonlockable versions. They come in a range of different nose sizes to match the frame.

The handle is secured with the small triangle-shaped spur (spur) which is fixed to the frame. These are usually single-way handles, but the deadlock that locks can be added to give additional security.

The replacement cockspur handles are also simple to install. All you need is the correct backset and a brand new set (supplied). The backset is measured from the baseplate to the nose on the underside of the handle. Aluminium window frames are generally 9mm wide, whereas UPVC is 21mm wide. There are a variety of other options however it is essential to measure before buying the handle (see video below for how).

This type of window handle can be substituted by simply unscrewing the existing handle and removing the spindle, or in some cases, the entire handle. The replacement handle can then be secured with two pozidriv screws. The pozidriv screws can be purchased in zinc or brass finishes to match the hardware. There is also the option of a locking version that self-locks.

It is a simple to install replacement for the cockspur handle that is perfect for repairing or replacing old uPVC windows. They feature a universal design which makes them suitable for all profiles and backsets. Each handle is equipped with three packers, each of a different thickness. These are neatly installed on the underside of handle noses and can be combined to make backsets as tiny as 9mm or as high as 21mm. The handles are available in both left and right-handed versions, as well as lockable and nonlockable versions. They also come in a variety nose heights.

Tilt and turn

Tilt and turn windows are a popular European window style that has been around for a long time in Europe but is beginning to gain traction in the United States. They combine the benefits of three window styles into one – tilt, pivot, and in-swing. They are perfect for older homes since they offer more airflow than standard windows.

When tilt and turn windows are closed, they will lock as any other fixed window. But, by turning the handle 90° or 180@ (depending on the type of tilt and turn window) the window sash will open inwards and the window can be tilted in order to allow air circulation through the gap at the top of the frame. This is an excellent way to let air circulate without opening a large potentially dangerous window.

If the handle is turned 90@ or 180@, the sash can be fully opened like a door. This allows for complete air circulation, which is particularly useful for rooms that are smoky or where smoke or other odors can accumulate. It also makes cleaning the outside of the glass much simpler because it can be done from inside the home – a job that usually requires precarious ladders.

Tilt-and turn windows are also safe. They are very difficult to open if locked in closed position. They also have double seals that keep rainwater out of your home while it is in the tilted position or swing. This is a helpful feature for older homes, where burglars are more likely to target traditional windows that are opened via the side hinges.

Spade

There are several kinds of window handles that can be fitted to upvc double glazed windows. The two main types are Espag handles and Cockspur handles. There are also tilt and turn handles, spade or blade handles and monkey tail handles. The type of handle you pick will be based on your preferences and the kind of windows you have.

To select the right replacement of window glass upvc window handle, it is important to know how your existing handle is attached to the frame. This is referred to as handing and is a vital piece of information to know when purchasing online. Certain handle styles do not fit all windows. For instance, some handles are angled whilst others are straight and either turn left or right. You’ll also need the size of the spindle, which is the distance between the base of the handle and the head of handle.

Another aspect to consider when choosing the right handle is knowing whether your windows require a restrictor or not. They are generally used in high-rise apartments or commercial buildings, however they are not required for domestic homes. Also, you should consider the step height, which is the distance between the screw plate and the nose of handle.

Spade comes from Old English spadu, spaedu or spada and has been translated into many languages including German spaten and Low German spathen. In the 1920s, during the Harlem Renaissance in New York City, spade began to be used as a sexist term for black people. Spade has since risen to prominence in pop culture and is a widely recognized symbol of African American heritage and pride.

It is important to get the right size when replacing a Cadenza-style handle. The handles are available in angled and straight versions which differ by just a few millimetres. The handle head is available in a variety cost of windows replacement designs, including a D or T shape. It can also be left unhandled.