Write About Everything

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they do not rust or window repairs rot.

It is crucial to wash and oil UPVC doors and windows regularly. This will save you from costly repairs and increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a great amount of damage to your home, which can make it very hazardous and possibly fatal. It is essential to take the time to ensure that you’re doing everything you can to keep your windows in good repair.

Single-pane windows are relatively simple to replace, and they typically fit into old frames very easily. If windows with double panes are held together by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this case you’ll need to locate some plastic spacers that assist the new pane to fit correctly into the frame of the window.

If you plan attempt to remove the window panes by yourself it is important to wear appropriate safety gear such as gloves that are thick and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards of glass fall onto the fabric and not on the floor window repairs which could cause them to be trampled.

After the glass has been removed and the glass is removed, it’s a good idea to cover the gap with packaging tape or duct tape to stop water and drafts from getting into the home until a professional is able to come out and repair the window. This will also act as a barrier that will prevent any intruders from getting access to your home. If the gap is particularly large, you might want to consider using the security door with an integrated window repair, since this will offer the best of both worlds.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash windows. However, over time they can suffer from a variety of issues like sliding. A sagging uPVC window could cause issues with light, draughts and even security. It’s important to take action immediately if you discover that your uPVC windows are sagging.

Repositioning the hinges can aid in fixing a window that is sagging. First, you’ll need to unblock the windows to get at the frame. Then, you can remove the hinges at the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. Close your window to test the fit after you’ve relocated your hinges. If you’re satisfied with the fit of your window, you can tighten screws to keep them in the right position.

If you cannot reposition the hinges, you might have to replace the seal. Rubber seals may dry out and lose their elasticity with time, leading them to lose their tightness. It is important to replace your seal as soon as you can in order to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also become loose. Often, this is caused by screws that have become loose over time. However, it could be due to the fact that the handle mechanism has worn out. It’s relatively easy to fix a loose uPVC hand. The first step is to close your window and do an initial test fit. The corners of the sash should be aligned with the casing joint. If it isn’t, you can make use of a screwdriver to loosen the handle and return the mechanism to its original position.

3. Water Leaks

If you wake up to wet floors and mouldy walls every time it rains it’s important to take action. Leaks of water from windows can cause structural damage to your home and also affect your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be completed by anyone who is a DIYer with the skills. Depending on the severity of the issue the caulking that was used up might need to be removed before a new layer of caulk is applied. It is important to keep in mind that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk in order to make the area more difficult to clean and could reduce your energy efficiency.

Check that any drainage holes are free of debris in them, and also that the sill pan is angled correctly to drain away from the window. In more serious instances, you may need to replace the window.

Moldy sills and rotten ones are other signs of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the house.

If the leakage occurs between the double-glazed glass it is more likely that the issue is related to the seal, not the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or if it blows open with a breeze. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that have hinges and, just like any mechanical component they are susceptible to wear and tear over time. Changing a window hinge is an easy process but it can be easier to do if you have someone to help you hold the frame in place.

Check that the uPVC hinges are open and closed in the correct direction. This can be done by checking for the arrows on each hinge. This indicates which way the window should open.

Window hinges that aren’t working properly could be the result of incorrectly opening the window repairs in a particular way or by poor installation at the factory. This issue can be fixed by sending us a photo on our website. We will be pleased to offer you suggestions.

It is also crucial to lubricate the hinges on a regular basis. Applying a light engineering lubricant to the hinges is a great way to do this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also reduce the risk of a window sticking and prevent corrosion. The ideal time to perform this every year. WD40 or other solvent-based oils should not be used as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different things. The hinges can also become misaligned due to wear, causing an opening where the sash meets frame. They can be repaired by giving them good clean, but in the event that they are beyond repair it might be necessary to have them aligned or replaced. The second is the interlock, which is located on the hinge side of the window and can also become misaligned, again it may be possible to just give them a thorough clean, however in certain cases, it may be necessary to have these replaced.

The next common reason for draughts is window seals. They can become worn down or damaged over time and will allow air to escape through these gaps. Replacing these with high-quality weatherstripping can help stop draughts. Another alternative is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures and will reduce the possibility of draughts.

Lastly, one of the most effective ways to reduce draughts is by using an draught excluder. These are typically made of fabric that are filled with some kind of filler. They can be positioned on the windowsill on top. They will help block out cold air and keep your home warm and cozy!

The windows made of upvc can remain a great source of insulation and security to your home with regular maintenance and repairs. It is essential to remember that all windows will eventually get worn out and it could be more cost-effective to simply replace them than to repair them. If you are having issues with your upvc windows, it’s best to seek professional assistance as soon as you can.