Write About Everything

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to decay or rust as timber and aluminum.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will help avoid unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large amount of damage to your home, making it very dangerous and potentially fatal. It is important to ensure that your windows are in good working order.

Single-pane windows are relatively simple to replace and generally fit into frames of the past easily. If you have double-paned windows that are held together by internal beading, it will be more difficult to remove and replace the old panes. In this instance you’ll need to locate some plastic spacers that will assist the new pane to fit correctly into the window frame.

Wearing eye protection and heavy gloves is a must for anyone who plans to remove the glass by yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards fall on the fabric, not onto the floor, where they could be trampled.

Once the glass is removed, it’s a good idea to cover the gap with some clear packaging tape or duct tape to prevent drafts and water from entering the home until a professional is able to come out and fix the window. It also acts as an obstruction to prevent intruders from making their way into your home. If the distance between the window and the door is significant, you may need to consider a security screen that also has an opening. This will provide the best of both.

2. Sagging

Upvc windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber sash windows. However, over time, they are susceptible to a range of issues, including sliding. A window that is sagging can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to lose its shape, it’s crucial to act fast to stop the issue from getting worse.

Repositioning the hinges could aid in fixing a window that is sliding. To accomplish this, you’ll need to open the window to access the frame. With an screwdriver, unscrew the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after having repositioned your hinges. If you are happy with the size of the window, you can tighten screws to secure them in the right position.

If you cannot reposition the hinges, you may have to replace the seal. As time passes, rubber seals lose their elasticity and dry out, which causes their tightness to decrease. If this happens, it’s important to replace the seal as quickly as possible so that your uPVC windows remain watertight and safe from drafts.

UPVC handles can also become loose. Often, this is caused by screws that have become loose over time. However, upvc window repairs it can also happen because the handle mechanism has been worn out. It’s fairly simple to repair a loose uPVC handle. First, you’ll need close your window and do a test to ensure that it fits. The corners of the sash need to align with the casing joint. If it isn’t then you can use a screwdriver to loosen the handle and then reverse the mechanism back into the position it was in.

3. Water Leaks

It is important to act if you awake each day to find a smoky wall and wet floors. Leaks of water from windows can cause structural damage to your home and also impact your ability to regulate the temperature of your home. The most common reason for leaking uPVC windows is that the sealant around the frame is damaged or missing.

This is a relatively easy fix that can be done by any DIY expert. Depending on the severity of the issue is, the old caulking may have to be removed. It is essential to remember that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk and then make the area harder to clean and uPVC window repairs can reduce the efficiency of your energy.

Check that any drainage holes are free of debris inside them and that the sill pan is angled correctly to drain away from the window. In more serious instances, you might need to consider replacing the window.

Mold spots and rotten sills are other signs of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the house.

It is also important to remember that if the leak originates from the glass of your double-glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sagging. Again this can easily be fixed by an uPVC window repairs specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and open with a breeze It could be hinges that are at fault. Anyone with the skills to fix them can replace these in a matter of minutes.

Like all mechanical parts hinges will wear out over time. It is essentially a simple process, but it’s simpler when you have a person to assist in holding the frame up.

It is also worth checking that the uPVC hinges are being opened and closed in the correct direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window in a certain way or by poor installation at the factory. It is usually possible to fix the issue by sending us a photograph through our website and we will be more than happy to give you advice.

It is also crucial to grease the hinges regularly. This can be accomplished by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It can also stop corrosion and decrease the chance of sticking. This must be done at a minimum once a year. WD40 and other solvent based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a variety of different factors. Firstly the hinges, again because of wear and tear, can become misaligned, this will cause a gap to form where the sash meets the frame. If they’re beyond repair, it may be necessary to get them re-aligned. The interlock, which is located on the hinge of the window, can also become misaligned, again it may be possible to give them a thorough clean, however in some instances it could be necessary to get them replaced.

These seals are susceptible to wear and tear or become damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity lenses. This will help regulate indoor temperatures and decrease draughts.

The last way to reduce draughts effectively is by using a draught-excluder. These are usually made of fabric tubes filled with a filler that can be hung over your window sill. They can keep your home warm by blocking out cold air.

The windows made of upvc can continue to provide excellent insulation and security to your home by performing regular maintenance and repairs. It is important to remember that all windows eventually wear out and it could be cheaper to replace them rather than repair them. If you have any problems with your upvc window, it’s best to consult a professional as soon as possible.