Write About Everything

Why Should You Have a Ghost Immobiliser Installed?

Autowatch Ghost is the next-generation vehicle immobiliser. It safeguards your vehicle from theft. It works discreetly by connecting to the car’s CAN data networks and requires a unique, changing PIN code sequence to be entered for the vehicle to start.

The system is quiet, doesn’t have LED indications and is undetectable by diagnostic tools. It is TASSA approved and recognised by a few insurance companies.

No Key Fobs or LED Indicators

Ghost immobilisers, a revolutionary advancement in security for cars that can stop thieves from driving even if they enter your vehicle. It connects to the onboard CAN data circuit of your vehicle and communicates quietly, so there are no radio signals or key fobs in the process, making it impossible for thieves to get around it. It is also unnoticeable with diagnostics, and lacks an LED indicator that can reveal its position. This makes it a fantastic option for rare or expensive automobiles, like classic cars.

Autowatch Ghost is a tiny device that is hidden within your vehicle’s loom which makes it virtually impossible for thieves to find it. The device connects with the ECU to stop theft. It connects to the CAN (Controller Area Network) system. It is incredibly easy to install and can be set up in less than an hour. It is also less intrusive than other anti-theft devices, such as steering wheel locks.

The device is built on the same technology as GPS trackers, however it prevents theft by preventing the vehicle from starting. It makes use of buttons on your car to create an individual, unique, and changeable PIN code that must be entered in order to allow you to drive your car. The device can be programmed to use obscure buttons such as those on the rear defroster, making it more difficult for thieves to figure out the PIN. This kind of technology is becoming more popular, and numerous insurance companies are now requiring it on cars with a keyless entry system.

The Ghost also prevents key cloning and hacking. The device is connected to the vehicle’s CAN bus and uses the buttons to generate an unique code that is able to be changed. The code has to be entered in order to start the car. The device cannot be defeated by altering the ECU or by adding new key fobs. The criminal will have to employ a specific tool to get around the immobiliser.

The cost of the ghost immobiliser is very affordable and can be used in conjunction with a GPS tracker to ensure your vehicle’s security. It is an excellent choice for older vehicles and can help you save money on insurance premiums. Contact Trackershop for an estimate on ghost immobiliser. We’ll include installation in the cost, so you can have peace of mind regarding the security of your vehicle.

It is TASSA Approved

If you’re trying to secure your vehicle, an immobiliser is the best way to do it. It can disable features such as the starter motor or the fuel pump when the PIN code is not entered correctly. It is crucial to install an immobiliser by an expert. Installers must be TASSA-approved since this ensures that the product is safe to use and functions properly. The process involves verifying the credentials of the installer. This includes an identity check and criminal background checks. an identity check.

The Ghost immobiliser has been designed to prevent thieves from stealing vehicles. It connects to the CAN data network in your vehicle and does not require for additional fobs or alarm systems. The system is silent and is not able to be identified by car trackers. It utilizes the buttons on your steering wheel, door panels, and the centre console to create a unique PIN code sequence. It is essential to enter the correct sequence to start your car. This makes it extremely difficult for thieves.

This innovative immobiliser is accepted by TASSA and is available for installation at Trackershop. They are specialists in installing this device. It also provides other security products, including remote starters and Fitted a tracking device that prevents theft. The team of technicians can install the device at your office or home.

It is essential to secure your vehicle, since more and more vehicles are being stolen without keys from the owners. Modern cars that are keyless are especially vulnerable, as cloning tools and door lock picks are readily available on the web. A Autowatch Ghost can help to prevent this, as it’s not able to be spotted by thieves or snatched by a vehicle tracker.

The Ghost II CAN immobiliser is completely hidden, and is unable to be tampered with by thieves. It can detect attempts to tamper with the ECU, and will shut down parts of the engine in an attempt to disable the immobiliser. In addition, it could even disable the car alarm to prevent attracting attention and allowing thieves to escape from the vehicle.

It is reversible

The Ghost immobiliser can be fitted or removed at any time. It is directly connected to your vehicle’s CAN (Controller Area Network) and provides protection through a personalised PIN code, which is a secret sequence that only you know. When the PIN code is entered correctly, the vehicle will not start, and thieves are discouraged from attempting to steal it.

The installation of the Ghost is not invasive, and your vehicle’s warranty will not be affected. The system is also compatible with any aftermarket alarm or tracker you may have installed. Moreover, it will not leave any trace on the interior or exterior of your vehicle. It’s not noticeable to thieves since it does not utilize keys or LED indicators.

The Ghost Immobiliser is not one of the devices used by organized car thieves to detect the circuit wiring of vehicles. Instead, it utilizes buttons located on the dashboard or steering wheel to let you set an individual PIN code sequence. The code has to be entered to start the vehicle.

The Ghost Immobiliser can also protect your vehicle against OBD port hacking. This kind of theft has become more popular, and it’s one of the most difficult methods to stop. The Ghost Immobiliser helps prevent these thefts since it stops the theft perpetrator from connecting a laptop to the OBD port of your vehicle and copying keys.

The Ghost can also be used in conjunction with a car tracker, which can be extremely useful in locating your vehicle after it has been taken. It is not recommended to use a tracker for your primary security measure against theft since they don’t stop the theft. They are also more easily to detect and remove than the Ghost immobiliser.

It is easy to install

A Ghost immobiliser is a revolutionary new technology that can safeguard your vehicle from theft. It works by connecting to your vehicle’s CAN (Controller Area Network) system and generating an unique code sequence that is difficult for thieves to break. It’s a low-cost and highly effective method to ensure your car is safe from being taken.

Ghost is designed to work with all vehicles, including keys from aftermarket manufacturers. The device uses the buttons on the dashboard, steering wheel and central console to generate an unique PIN code that blocks thieves from opening your vehicle. It also offers a range of additional features, such as a GPS tracker that can locate your car.

This type of device is a very popular choice for many drivers due to the fact that it offers security against kinds of vehicle theft. It is easy-to-install, silent, and does not use radio signals. It’s also a good choice for those who don’t wish to purchase a full alarm system. It is, however, essential to get a professional to install the alarm to ensure that it works effectively.

It’s important that you have a professional install your ghost immobiliser to ensure it works as it should. A professional will know where to put it and will ensure that the unit is properly connected to your vehicle’s electronic system. The installer will also make sure that the device is kept from view and isn’t observed by anyone who doesn’t have any reason to know about it.

The autowatch ghost installer Ghost II can be set to valet/service mode, which allows you to drive your car at 30mph without needing the access key. This makes it perfect for valet parking or moving your car. It can also be used in this mode if your vehicle is being serviced by dealers. This mode can be turned off with the companion app and can be reset at the end of each use.

The Ghost is the first aftermarket CAN bus immobiliser that doesn’t require cutting wires. It is directly connected to the CAN system that is onboard of your vehicle. It is not able to be detected by diagnostic tools or cloning equipment. It is tamperproof silent, quiet, and doesn’t emit any radio signals. It is also reversible, allowing you to move it to another vehicle in the event of need.