Write About Everything

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they do not rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help avoid unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home and may even be fatal. It is essential to take the time to ensure that you are doing everything you can to keep your windows in good repair.

For single pane windows it is relatively easy to replace them, and the new window is usually able to fit into the frame of the previous one easily. If windows with double glazed window repairs panes are joined by internal beading, it is harder to remove and replace the old panes. In this case you’ll need locate some plastic spacers to aid the new pane in being able to fit perfectly into the frame of the window.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass yourself. It is also an excellent idea to lay down a dropcloth before you begin working on the glass so that any shards will fall on the fabric instead of landing on the floor where they can be trodden under and cause further damage.

It’s a great idea to tape the gap once the glass is removed. This will keep drafts and water from entering your property until a professional comes out to repair the window. This also serves as an obstacle to stop intruders from getting into your home. If the gap is particularly large, you may want to consider using a security door that has an integrated window as it will provide the best of both worlds.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash window. However, with time, they may be afflicted by a variety of problems including sagging. A sagging uPVC window can cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to shrink, it is important to act swiftly to stop the issue from becoming worse.

To fix a window that is sagging you can try repositioning the hinges. First, you’ll need to open the windows to access the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver, and then adjust them counter-clockwise or window repairs clockwise. After you’ve repositioned the hinges, shut your window and test it for an appropriate fit. If you’re happy with the fit, you can tighten the screws to ensure they remain in place.

If you aren’t able to move the hinges, you might need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, leading them to loosen. It is essential to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also become loose. Often, this is caused by screws that have come loose over time. However, it could occur because the handle mechanism has worn out. It’s fairly simple to repair a loose uPVC handle. First, you’ll need to close the window and then perform an experiment fit. The corner joints of the sash must be aligned with the casing joint. If it isn’t you can use a screwdriver to loosen the handle. Then, you can turn the mechanism to position.

3. Water Leaks

If you’re waking up to wet floors and mouldy walls each time it rains it’s crucial to take action. Windows that leak water do are not just a cause for destruction of your home’s structure but also hamper your efforts to control the temperature in your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be completed by any DIYer who is competent. Depending on the severity of the issue the caulking that was used up might need to be removed before a fresh layer can be applied. It is important to remember that when it is about uPVC window repairs you should avoid the temptation to “over-caulk and then make the area more difficult to clean and could reduce your energy efficiency.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious cases you may need to think about replacing the window.

Mold spots and rotted sills are other signs of water leakage. This is a fungus that thrives in damp conditions and can quickly spread across the house.

It is also important to remember that if the leakage originates from the glass of your double-glazed windows, it’s more likely to be a problem with the glass seal, rather than the frame or sliding. It is also possible to be corrected by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and blow open with a breeze it could be hinges at the fault. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Like any mechanical part hinges are prone to wear out over time. Changing a window hinge is an easy process, but it’s easier when you have a person to help you hold the frame up.

Make sure that the uPVC hinges are open and closed in the proper direction. This can be done by looking for the arrow on each hinge. This indicates which way the window should open.

Window hinges that aren’t working properly could be caused by improperly opening the window repair near me a certain way or by inadequate installation at the factory. Sending us photos via our website is often enough to resolve the problem. We are always happy to offer advice.

Regular lubrication of hinges is also essential. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also prevent corrosion and decrease the chance of sticking. The ideal time to perform this every year. WD40 and other solvent-based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by different causes. The hinges can also be unbalanced due to wear, creating a gap where the sash and frame meet. If they are damaged beyond repair, it could be necessary to have them realigned. The second is the interlock, which is located on the hinge of the window, can also become misaligned, again it’s possible to just give them a thorough clean, however in some instances it could be necessary to get them replaced.

The seals may wear out or become damaged over time, allowing air escape. Replacing these with high-quality weatherstripping is a good way to keep draughts at bay. Replace the upvc windows with low-emissivity glasses. This will help control indoor temperatures, and reduce draughts.

Lastly, one of the most effective ways to cut down on draughts is by using a draught excluder, these are typically fabric tubes filled with some kind of filler. They can be placed on the top of your windowsill. They can keep your home warm by blocking cold air.

Your upvc windows can remain a great source of insulation and security in your home with a little regular maintenance and repairs. It is important to remember that all windows will eventually become worn out, and it is more cost-effective to replace them than to repair them. If you encounter any issues with your window made of upvc you should consult an expert as soon as possible.