Write About Everything

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are long-lasting, durable and easy to maintain. They don’t get rotten or rusty like timber and aluminum.

It is important to clean and oil UPVC doors and windows on a regular basis. This will help avoid unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great amount of damage to your home, which can make it very dangerous and potentially fatal. It is important to make sure that your windows are in good condition.

For single pane windows, it is relatively easy to replace them, and the replacement is usually able to fit into the old frame very easily. If you have double-paned windows which are held together by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this instance you’ll need source some plastic spacers that help the new pane to fit properly into the frame of the window.

Wearing eye protection and thick gloves is essential for anyone who plans to remove the glass yourself. You should also lay down a dropcloth before you begin working on the window panes to ensure that any shards fall on the fabric and not on the floor and could be trampled.

After the glass has been removed from the window, it’s best to cover the gap with some clear packaging tape or duct tape to block drafts and water from entering the property until a professional can come out and fix the window. This also serves as a barrier to prevent any intruders from getting into your home. If the gap between the window and the door is large, you might need to consider a security screen that also has an opening. This will give you the best of both.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, over time they are susceptible to a range of issues, including sagging. A sagging uPVC window can cause issues with light, draughts, and even security. It is crucial to act as soon as you realize that your uPVC windows are sliding.

Repositioning the hinges can aid in fixing a window which is sliding. First, you’ll need to open the windows so you can get at the frame. With the screwdriver, you’ll be able to unscrew the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you have moved your hinges. If you’re satisfied with the fit of the window, you can tighten screws to secure them in the right position.

If you are unable to move the hinges, you might need to replace the seal. Over time rubber seals can lose their elasticity and dry out and cause them to loosen. If this happens, it’s important to replace the seal as fast as you can to ensure that your uPVC windows are watertight and secure from draughts.

UPVC handles can also become loose. This is often caused by screws that have been removed over time, but it could also be caused by the handle mechanism wearing out. Fortunately, it’s easy to fix the handle of a window that is loose yourself. First, you’ll need to close your window and do an experiment fit. The joint at the corner of the sash should be aligned with the joint on the casing. If it isn’t, you can use a screwdriver or a wrench to loosen the handle and return the mechanism to its original the position it was in.

3. Water Leaks

If you wake up to wet floors and damp walls every time it rains it is important that you take action. Windows that leak water do are not just a cause for degradation of your home’s structure but also hamper your efforts to control the temperature in your home. The most common reason for leaks in uPVC windows is that the sealant around the frame is damaged or not present.

It is a fairly easy fix that can be completed by any competent DIYer. Depending on the severity of the issue is, the old caulking may need to be removed. It is essential to remember that when it is about uPVC window repairs, you should avoid the temptation to “over-caulk and then make the area harder to clean and decrease the efficiency of your energy usage.

Make sure that the drainage holes do not have debris in them, and also ensure that the sill pan is properly angled to allow the water to drain from the window. In more severe situations, you may have to replace the window.

Moldy sills and rotten ones are also signs of water leakage. The is a fungus that thrives in damp conditions and can quickly spread across the home.

It is also important to keep in mind that if the leak is coming from between the glass in your double glazed windows, it’s more likely to be an issue with the glass seal, rather than the frame or sliding. This can be easily repaired by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open or it opens with a breeze. They can be easily repaired by any skilled DIYer and are usually completed in just a few minutes.

Most households in the UK will have either top hung or side-hung upvc window repairs near me windows that are hinged and, like all mechanical parts, they are susceptible to wear and tear over time. It is very easy to change the hinges on a window but it’s much simpler if you have someone to help hold the frame.

Verify that the uPVC hinges are closed and open in the proper direction. You can do this by looking for the arrow on each hinge, this indicates the direction in which the window should open.

The problem can be caused either by opening the window improperly or by a poor installation in the factory. Sending us a photo via our website is often enough to resolve the problem. We are more than happy to offer suggestions.

It is also crucial to ensure that the hinges are lubricated on a regular basis. Applying a light engineering lubricant to the hinges is an ideal way to do this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more easily. It also decreases the possibility of a window sticking and prevent corrosion. It is recommended to do this once a year. WD40 and other solvent-based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by different things. The hinges may also become disaligned as a result of wear, causing gaps between the frame and sash. These can be easily repaired by giving them a good clean, but if they are beyond repair it might be necessary to get them realigned or replaced. Secondly the interlock, this is located on the hinge of the window, may also become misaligned, again it is possible to just give them a thorough clean, however in some cases it might be necessary to have these replaced.

The seals may wear out or become damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass, which will help regulate indoor temperatures and again will reduce draughts.

The final method to cut down on the amount of draughts is to use a draught-excluder. These are usually fabric tubes filled with a filler that can be hung over your window sill. These will help to block out cold air and keep your home warm and cosy!

Your Upvc Window Repair windows can remain a great source of insulation and security in your home with a little regular maintenance and repairs. It is important to remember that all windows will eventually wear out and it may be more cost-effective to simply replace them than to repair them. If you have any problems with your window made of upvc, it’s best to consult an expert as soon as you can.